Standard Trims & Flashing
10+ Years Fabrication — 1000+ Projects Delivered
for Pre Engineered Buildings. Standard Trims & Flashing are the formed metal pieces that seal the joints, edges and corners of a steel building. They stop rain, dust and wind from getting in, and they give the building a clean, finished look. KAIZEN STEEL BUILDING SOLUTIONS PVT LTD manufactures and supplies factory-formed trims and flashing for warehouses, factories, cold storages and commercial sheds. Every piece is made to match your roof and wall sheets, so it fits at site without cutting.
Years of Fabrication Experience
Projects Delivered
Client Satisfaction
Global Delivery Locations
Our Range
KPF
Our Standard Trims & Flashing Range
We supply the full set of standard PEB trims that a pre-engineered building needs. All pieces are roll-formed or press-broken in our factory to fixed sizes, so the fit stays the same from the first piece to the last.
Product
Name
Code
Where it is used
15 Profiles
Factory Formed
List Current
Fig. 01 — Roof
Clear / Fold /
Cut
01 — Fig. 01
Group 01
Gable Trim
GT1Covers the sloping and edge of the roof.
Group
Roof
Position
Factory-formed
Thickness
0.5–0.6 mm
Pitch
Your sheets
Envelope
Roof, wall and drainage
01 / ROOF
PEB Roof Trims and Roof Flashing
At the ridge, eaves, and gable ends, the roof needs the strongest protection. Our PEB roof trims include ridge caps, gable trims and eave trims. Our PEB roof flashing seals the joints between roof cuts and roof-to-wall junctions, so each line is clean and the building stays water-tight.
02 / WALL
PEB Wall Trims and Wall Flashing
Wall sheets end at corners, openings and the base, and each of these ends needs a cover. Our PEB wall trims finish corners, panel ends and the wall base. Our PEB wall flashing seals the top of walls, windows, doors and roll-up shutters, so wind-driven rain cannot get behind the sheets.
03 / DRAINAGE
Gutters and Drainage
Roof water must go somewhere safe. Eave gutters and downpipe profiles carry it down to the stormwater line. Our downpipes run along your wall line and collect at the base of the building.
Product Gallery
KSBPL
Product Gallery
Group 1: Roof Trims and Flashing
Fig. 04 · FC200 / FC250
Cap Flashing (FC200 / FC250)
Seals exposed joints and edges (for 200 and 250 Z purlins)
Get a Quote
Materials and Finish
Materials and Finish
We match your trims to your sheets, so colour and service life stay the same across the building.
Material
Best For
Selected Finish
Colour-coated steel (PPGI)
Best For
Buildings where looks matter
Typical thickness is 0.5 mm to 0.8 mm. We confirm gauge, coating and colour with you before production.
Custom profiles: If your design needs a shape that is not in the list, send us your drawing and we will make it.
Send a DrawingWhere Used
Where These Trims and Flashing Are Used
Trims and flashing are needed in every steel building, but what matters most changes with the type of building. Here is how our products are used in each one.
FIG. 01
Warehouses and logistics parks
These buildings are long, with wide roofs and many loading doors. Water usually enters at the ridge, the eave and around dock doors. We supply ridge caps, eave trims, gable trims and jamb trims. This keeps stored goods dry and the building tight through heavy rain.
Not sure which trims your building needs? Send your drawing and we will prepare a full list for you.
Send Your DrawingWhy Kaizen
Why Choose Kaizen Steel Building Solutions PVT LTD
When you buy PEB building trims, you need the right pieces in the right size and colour on time. A missing piece or wrong size can stop a project for days. Read on. You need to know how we work. That is why buyers choose KAIZEN STEEL BUILDING SOLUTIONS PVT LTD for their Standard Trims & Flashing supplier.
10+
Years Fabrication Experience
500+
Projects Delivered
ISO 9001:2015 Certified
Our process is audited, so every batch of trims comes out the same.
We are a PEB company, not just a trader
We design and build pre-engineered buildings. Our pre-engineered building trims are planned along with the frame, purlins and sheeting, so every piece is made for your building. That is why we can solve problems. We do not resell.
Factory-formed accuracy
Every trim is formed in our own manufacturing facility to fixed sizes. Bends, lengths and hole positions stay the same from the first piece to the last batch. This means your site team can fit pieces faster, with fewer gaps and less rework.
Colour and coating that match your sheets
Trims that do not match the sheets spoil the look of a new building and can wear out at a different rate. We match the base metal, coating and colour to your roof, wall and trim supplier.
Custom profiles when you need them
Sometimes the standard profile does not fit. For curved edges, a unique fascia detail or a non-standard opening, send us your drawing and our team will develop the profile, so you are not forced to change the design to suit a catalogue.
A complete trim list from your drawing
One of the most common problems on site is ordering too few or the wrong trims. We study your drawing and prepare a full take-off covering roof edges, corners, openings and drainage. You order what you need, and nothing is missed.
One source for the full building envelope
Our trims, roof and wall sheeting, and eave gutters come from one supplier. You deal with one team, one delivery plan and one point of responsibility. This saves time and avoids the confusion of matching parts from different sellers.
Engineers you can talk to
Our technical team answers questions about profile choice, coatings, overlaps and sealing before you order and after delivery. You are not left with a catalogue and a phone number.
Careful packing and dispatch
Thin trims scratch easily in transport. We pack them to protect the coating and dispatch in step with your site schedule, so pieces arrive when your crew is ready to fit them.
Presence in India and the Middle East
With our office in India and our office in Dubai (KAIZEN), we support projects in both regions and can plan supply to match your location.
How We Work
How We Work
Our process is simple and clear, so you always know what happens next and what we need from you.
01
Share
02
Study
03
Quote
04
Make
05
Dispatch
06
Site
Step 01
Share your requirement
Send your building drawing, plot size or a list of required trims. You can call us, fill in the form below or upload the drawing. If you only have a rough idea, tell us the building type and size and we will guide you.
What we need: building length and width, roof type, number of doors and windows, and your preferred colour.
Step 02
We study and prepare your trim list
Our team checks the roof edges, ridge, corners, openings and drainage points. We then prepare a complete list of trims with codes, lengths and quantities. If something in your drawing needs a special profile, we flag it now.
Step 03
You receive a quote
We send a price for the full list, along with the material, coating, colour and delivery schedule. If you want to compare options, such as GI against PPGL, we show the difference so you can choose with confidence.
Step 04
You approve, and we manufacture
Once you confirm, we form your trims in our factory in the chosen gauge and colour. Pieces are checked for size, bend and finish before they are packed.
Step 05
We pack and dispatch
Trims are bundled by type and packed to protect the coating from scratches and damp. We dispatch based on your site schedule, so pieces are available when your crew needs them.
Step 06
Site support
Our team shares fitting details and can guide your installer on correct overlaps, sealing and fastening. If a question comes up on site, you can call us.
Client Voices
What Our Clients Say
KSBPL
Kaizen sent a full trim list from our drawing before a single piece was ordered. Ridge caps, eave trims, gable trims and jamb trims arrived in the same colour as the sheets. The roof was closed on the day we planned.
R. Mehta
Site Lead, Logistics Warehouse · Haryana
The office block met the shed at a non-standard fascia. They developed the profile from our detail instead of asking us to change the drawing. Pieces fitted without cutting.
A. Qureshi
Project Engineer, Manufacturing Plant · Gujarat
Coating matched the PPGL sheets, and the Dubai office kept dispatch in step with site. No missing corners. No last-minute local fabrication.
L. Fernandes
Procurement, Commercial Shed · UAE
FAQ
Frequently Asked Questions
Send the plot size.
We'll send the general arrangement
A free consultation for your next project — typically a call within one working day and a rate per sq ft within the week.
Let's build together
Get a free consultation for your next big project — engineering advice first, quote second.
362, 3rd Floor, Kohat Enclave, Pitampura, Delhi - 110034
Dubai — Works & Engineering
B17-327 RAKEZ Custom Building,
RAKEZ, Dubai — UAE
Phone
+91-8368273287